Beko DCU 8230 Clothes Dryer User Manual


 
20
EN
2. If there is lint accumulation in the water
tank cover, clean it and press to close.
3. Place the water tank into its seat.
For the condenser
Hot and humid air in the condenser is
cooled with the cold air from the room. Thus,
the humid air circulating in your dryer is
condensed and then pumped into the tank.
C Clean the condenser after every 30
drying cycles or once a month.
To clean the condenser:
1. If a drying process has been carried out,
open the door of the machine and wait
until it cools down.
2. Unlock the 2 condenser locks after
opening the kick plate.
3. Pull out the condenser.
4. Clean the condenser by applying
pressurized water with a shower
armature and wait until the water drains.
5. Place the condenser in its housing.
Fasten the 2 locks and make sure that
they are seated securely.
6. Close the kick plate cover.