Beko DCU 7330 X Dryer Accessories User Manual


 
36
EN
Door open
Dryer door open symbol lights up.
Time delay
With the “Time delay” function you can delay the
programme start up to 24 hours.
1. Open the loading door and put the laundry in.
2. Set the drying programme and spin speed, and if
required, select the auxiliary functions.
3. Press “Time delaying” buttons “+” and “-” to set
the desired time delay. The time delay symbol
will flash.
4. Press “Start/Pause/Cancel” button. Then the
time delay starts to count down. The Time delay
symbol lights up. Start symbol lights up.
The “:” in the middle of the displayed time delay will
start flashing.
More laundry may be loaded or taken out during
the time delay period. At the end of the time delay
countdown process, time delay symbol fades,
drying process starts and the programme duration
is displayed. The time on the display is the total of
normal drying time and delay time.
Time delay is started by pressing the start/pause/
cancel button in the exemplary figure.
Changing the delay time
If you want to change the time during the
countdown:
1. Press “Start/Pause/Cancel” button for 3 seconds
to cancel the programme. Time delay function
must be set again for the required time.
2. Press Time delay buttons “+” or “-” to set the
desired time delay.
3. Press “Start/Pause/Cancel” button. The Time
delay symbol lights up. Pause symbol fades.
Start symbol lights up.
4. The “:” in the middle of the displayed time delay
will start flashing.
Canceling the time delay
If you want to cancel the time delay countdown and
start the programme immediately:
1. Press “Start/Pause/Cancel” button for 3 seconds
to cancel the programme.
2. Then, press “Start/Pause/Cancel” button to start
the desired programme.
Starting the programme
1. Press “Start/Pause/Cancel” button to start the
programme.
2. “Start/Pause” symbol will light up to indicate
that the programme has started and “:” symbol
between the remaining time will continue
flashing.
Progress of programme
Drying
Iron
Wardrobe
(Extra)
Ventilation
Anti-
creasing
The progress of a running programme is shown
through a number of symbols on the screen.
At the beginning of each programme step, the
relevant symbol in the series of symbols will light up
and thus, all symbols will remain lit up at the end of
the programme. The symbol that is lit up at the far
right of the series of symbols indicates the step that
is being carried out.
“Drying”:
- Lights up in all programmes apart from drying and
ventilation.
“Iron Dry”:
- Starts to illuminate when the drying degree reaches
“iron dry” step and remains illuminated until the next
step.
“Cupboard Dry”:
Starts to illuminate when the drying degree reaches
“wardrobe dry” step, and remains illuminated until
the next step.
“Extra Dry”:
Starts to illuminate when the drying degree reach to
“wardrobe dry extra” step.
“Ventilation”:
- Illuminates when the programme ends.
C Anti-creasing icon will light up at the end of the
programme if anti-creasing function is active.