TR
19
Auxiliary functions
Auxiliary function selection keys
• Dependingontheprogram,youcan
select the desired auxiliary function
by pressing the buttons.
• Selecttherequiredauxiliary
functions before starting the
program.
• Somecombinationscannotbe
selectedtogether.(Ex.:Prewash
and Quick Wash.
• Symboloftheselectedauxiliary
function(Figure3-2l)willlightup.
Auxiliary function selection
If an auxiliary function that should not
be selected together with a previously
selected function is chosen, the first
selected function will be cancelled and
the last auxiliary function selection will
remain active.
(Ex.:Ifyouwanttoselectprewashfirst
and then quick wash, prewash will be
cancelled and quick wash will remain
active.
Auxiliary function that is not compatible
with the program cannot be selected.
(see,“ProgramSelectionTable”)
Prewash
When you select this function, the
displaywillindicate“F1”symbol.
• Aprewashisonlyrequiredwith
heavily soiled laundry. Without
prewash you save energy, water,
detergent and time.
• Prewashwithoutdetergentis
recommended for veils and curtains.
Quick Wash
With this program, the wash time is
shortened.“F2”symbolwilllightupon
the display.
• Usethisfunctionforsmaller
amounts or slightly soiled laundries.
Rinse Plus
This function allows your machine to
perform an extra rinsing in addition to
the rinsing cycles performed by your
machine after main washing cycle.
Thus,theriskforsensitiveskins(babies,
allergicskinsandetc.)tobeeffectedby
the minimal detergent remnants on the
laundryisreduced.“F3”symbolwilllight
up on the display.
Anti - Crease
With this function, boiler movement will
be lessened to prevent creasing and
spinning speed is limited. In addition,
washing is carried out at a higher water
level.“F4”symbolwilllightuponthe
display.
• Usethisfunctionfordelicate
laundries that crease easily.
C Whenever you select this auxiliary
function, load your machine with
half of the maximum laundry amount
specified in the program table.
Time screen
The display shows the time remaining
for the program to complete while a
program is running. Time is displayed in
hoursandminutesas“01:30”.
• Programdurationmaydifferfrom
the values in the consumption table
subject to the changes in the water
pressure, water hardness and
temperature, ambient temperature,
type and amount of laundry, auxiliary
functions selected, and changes in
the supply voltage.
11a 11b 11c 11d