Beko D2 7102 E Washer/Dryer User Manual


  Open as PDF
of 36
 
TR
20
Time delay
Withthe“Timedelay”functionyoucan
delay the program start up to 24 hours.
Setting can be made in intervals of 30
minutes.
1. Opentheloadingdoor,placethe
laundry inside and fill with detergent.
2. Set the washing program,
temperature, spin speed and,
if required, select the auxiliary
functions.
3. Press“Timedelaying”buttons“+”
and“-”(Figure2-6)tosetyour
desired time delay. Time delaying
symbol(Figure3-2h)willflash.
4. Press“Start/Pause/Cancel”button
(Figure2-8).Thenthetimedelay
starts to count down. Time delaying
symbol(Figure3-2h)willlightup.
Startsymbol(Figure3-2j)willlight
up.
The“:”inthemiddleofthedisplayed
time delay will start flashing.
• Morelaundrymaybeloadedor
taken out during the time delay
period. At the end of the time delay
countdown process, time delaying
symbol(Figure3-2h)fadesand
the washing starts as the program
duration is displayed.
Changing the delay time
If you want to change the time during
thecountdown:
1. Press“Start/Pause/Cancel”button
(Figure2-8).“:”inthemiddleofthe
screen will stop flashing. Standby
symbol(Figure3-2k)willlightup.
Timedelayingsymbol(Figure3-2h)
willflash.StartSymbol(Figure3-2j)
will fade.
2. Press“Timedelaying”buttons“+”
and“-”(Figure2-6)tosetyour
desired time delay.
3. Press“Start/Pause/Cancel”button.
Timedelayingsymbol(Figure3-2h)
willlightup.Standbysymbol(Figure
3-2k)willfade.Startsymbol(Figure
3-2j)willlightup.
4. The“:”inthemiddleofthedisplayed
time delay will start flashing.
Canceling the time delay
If you want to cancel the time delay
countdown and start the program
immediately:
1. Press“Start/Pause/Cancel”button
(Figure2-8).The“:”inthemiddle
of the displayed time delay will stop
flashing.
2. Startsymbol(Figure3-2j)willfade.
Thestandbysymbol(Figure3-2k)
andthetimedelayingsymbol(Figure
3-2h)willflash.
3. Presstimedelayingbutton“-”
(Figure2-6)todecreasethedesired
timedelay.Programdurationafter
30 minutes shall be displayed.
4. Press“Start/Pause/CancelButton”
to start the program.
Starting the program
1. Press“Start/Pause/Cancel”button
(Figure2-8)tostarttheprogram.
2. Thestartsymbol(Figure3-2j)which
indicates that the program has
started will light up.
3. The door locks and the door locked
symbol(Figure3-2i)willlightup.
4. Symbol of the relevant step
(prewash,mainwash,rinse,softener
andspin)thattheprogramhas
startedfromwilllightup(Figure
3-2f).
Progress of program.
The progress of a running program is
shown through a number of symbols on
the screen.
• At the beginning of each program
step, the relevant symbol in the
series of symbols will light up and
thus, at the end of the program,
all symbols will remain lit up. The
symbol that is lit up at the far right of
the series of symbols indicates the
step that is being carried out.
Prewash
When“Prewash”auxiliaryfunctionis
selected, prewash symbol will light up to
indicate the beginning of prewash step.
 previous next