Beko D2 7101E Washer User Manual


  Open as PDF
of 36
 
TR
17
Coldselectionisshownwith“-”symbol.
Whenthe“Temperature”buttonis
pressed after coming to the Cold
selection, the maximum temperature of
the program you have selected will be
displayed.
To decrease the temperature, press the
“Temperature”buttonagain.
90˚C
Normally soiled, white
cottonsandlinens.(Ex.:
coffee table covers,
tablecloths, towels, bed
sheets)
60˚C
Normally soiled, fade proof
colored linens, cottons
or synthetic clothes
(Ex.:shirts,nightgowns,
pajamas)andlightlysoiled
whitelinenclothes(Ex.:
underwear)
40˚C
30°C
Cold
Fordelicateclothes(Ex.:veil
curtains),blendedclothes
including synthetics and
woolens.
Spin Speed selection
Whenever a new program is selected,
the maximum spin speed of the selected
program is displayed on the spin speed
indicator(Figure3-2a).
To decrease the spin speed, press
the“Spin”button (Figure2-1).Spin
speed decreases gradually. Then, rinse
hold and no spin options are shown
respectively.
Rinse hold is shown with “ ”andno
spin is shown with “ ”symbols.
If you do not want to unload your
clothes immediately after the program,
you may use the rinse hold function in
order to prevent your clothes become
wrinkled in an anhydrous condition.
With this function, your laundry is kept
in the final rinsing water. If you want to
spin your laundry after the rinse hold
function:
- Adjust the spin speed.
- PressStart/Pause/CancelButton.
Programresumes.Yourmachines
drains the water and spins your
laundry.
Youcanusenospinfunctioninorderto
drain the water without spinning at the
end of the program.
e
 previous next