Filter
Top Products
11
CONNECTING THE WATER SUPPLY HOSES
The water supply hose must be connected to the washing machine at one end and to the water faucet
at the other. Do not stretch the water supply hose. If the hose is too short and you do not wish to
move the water faucet, replace the hose with a longer, high-pressure hose.
Select appropriate faucet as shown in the figures below. If none of these faucets are available, use
the faucet adapter provided.
The end of faucet spout should be longer than 10mm (0.4”), or the connector cannot be fixed properly.
Water leakage could develop.
If you have both cold and hot water supplied, connect the inlet hoses by matching cold to cold and hot
to hot.
Note: The Hot Water Connector Lid is inside
the accessories bag;
If only cold water is supplied, take the Hot
Water Connector Lid from the accessories
bag and screw it onto the “Hot Water
Connector”