Filter
Top Products
4
GB
The On/Off indicator light signals that your dryer
is in use or ready to select a programme.
The ON/OFF button : If the dryer is running and
this button is pressed, the dryer stops. Press again,
the dryer restarts.
The Progress lights show you the status of the
programme. As each stage of the programme starts
the corresponding light turns on.
The Heat Icons indicate the heat setting of the selected
programme. High or Low .
Does not light if a Wool, Airing or Cool Tumble
programme has been selected.
The PROGRAMMES knob sets the programme: rotate
it until the indicator is pointing to the programme you want
to select (see Start and Programmes).
The START/CANCEL button starts a selected
programme. When you press this button there will be
one beep and the progress lights will flash to confirm
the action. If you have not set a programme, the buzzer
will beep three times. When a programme is running,
holding this button cancels the programme and stops
the dryer (see Start and Programmes).
The OPTION buttons select available options for your
selected programme (see Start and Programmes).
The Option lights indicate that the option to the left of
the light has been selected.
The Programme Guide allows you to consult a user
friendly table of the available programmes.
The Clean Filter light gives you a reminder before
every programme that it is essential to clean the filter
every time the dryer is used (see Maintenance and Care).
Control panel
Dryer Description
Clean Filter
Light
Programme Guide
PROGRAMMES
Knob
DISPLAY
START/CANCEL
Button
Indicator
Progress
Lights
OPTION
Buttons
Option
Lights
On/Off
Light
Heat
Icons
ON/OFF
Button
The front The back
Control Panel
Drum
Model & Serial
numbers
Filter
Air Intake Vent
Vent Tube fitted here
Caution: Hot!
Rating plate