Filter
Top Products
9
EN
Troubleshooting
Problem:
The dryer won’t start.
Its taking a long time to dry.
Possible causes / Solution:
●
The plug is not plugged into the socket, or not making contact.
●
There has been a power outage.
●
The fuse has blown.
●
The door is not closed securely?
●
The PROGRAMS knob has not been set properly (see Start and Programs).
●
The START button has not been pressed (see Start and Programs).
●
The filter has not been cleaned (see Maintenance).
●
The temperature setting is not ideal for the type of fabric you are drying
(see Start and Programs, and see Laundry).
●
Automatic / Sensor Dry programs require a HIGH temperature setting
(see Start and Programs).
●
The correct program has not been selected for this load (see Start and
Programs, and see Laundry).
●
The exhaust duct is obstructed (see Installation).
●
The air intake vent is obstructed (see Installation).
●
The permanent ventilation flap on the storm cover is obstructed (see
Installation).
●
The items were too wet (see Laundry).
●
The dryer was overloaded (see Laundry).
Before you call our Customer Care Department, go through the following troubleshooting suggestions:
www
.aristonappliances.us
Spare Parts
This dryer is a complex machine. Repairing it yourself or having a non-authorized person try to repair it could
cause harm to one or more persons and to the machine, and could invalidate the spare parts warranty.
Call an authorized service center if you experience problems while using the machine.
Contact number: 1 888 426 0825
If you still have a problem call our Customer Care Department on: 1 888 426 0825