Filter
Top Products
14
Problem:
The washer dryer vibrates
too much during the spin
cycle?
The washer dryer leaks?
There is too much foam?
The machine does not dry?
The ON-OFF/DOOR
LOCKED LED flashes
rapidly at the same time as
at least one other LED?
Possible causes / Solution:
●
The transit fixings were not removed correctly (see Installation).
●
The washer dryer is not level (see Installation).
●
The washer dryer is closed in, between furniture cabinets and the
wall (see Installation).
●
The water inlet hose is not connected correctly (see Installation).
●
The detergent dispenser is obstructed, clean it (see Care and
Maintenance).
●
The drain hose is not secured properly (see Installation).
●
The detergent is not suitable for machine washing (it should bear the
definition “for washing machines” or “hand and machine wash”, etc.)
●
You used too much detergent.
●
Is the cold water turned on at the tap?
●
Did you select the correct heat/time setting?
●
Was the laundry spun dry at the end of the wash programme, if not
select the spin and dry option to suit the type of fabric?
●
Is your water pressure within limits?
●
Call for assistance because this means there is an error.
GB
Troubleshooting