Filter
Top Products
LEDs
PROGRESS INDICATOR LEDs:
These light up to indicate the
progress of the selected
programme.
When the programme is started
the light corresponding to the
first cycle is lit and as the
programme progresses,
successive lights will come on
until the programme finishes.
FUNCTION buttons / LEDs:
When a function is selected, the corresponding
LED is illuminated.
●
If the function selected is incompatible with the
programme set, the button will flash and the function
will not be enabled.
●
If you set a function that is incompatible with
another function you selected previously, only the
last one selected will be enabled.
ON-OFF/DOOR LOCK LED:
If this LED is on, the appliance door is locked to
prevent it from being opened accidentally; to avoid
any damage. Wait for the LED to flash before you
open the appliance door.
! The rapid flashing of the ON-OFF/DOOR LOCK LED
together with the flashing of at least one other LED
indicates there is an error. Call for Technical
Assistance.
5
Additional feature - Models A1600WD, A1400SWD
and A1400WD only:
Your machine has a delay timer function and there are
additional markings alongside the LEDs.
DELAY TIMER set:
If the Delay Timer function
has been enabled (see
Starting and
Programmes), once you
start the programme the
LED corresponding to the
delay set will begin to
flash.
As time passes, the
remaining delay will be
displayed and the
corresponding LED will
flash:
Once the set delay is complete, the flashing LED will
turn off and the selected programme will start.
Automatic Rinse hold
●
Models A1600 and A1400
Note: If you have selected a synthetic wash
programme, the machine will automatically stop in
the final rinse and the LED will flash, press the
START/RESET button to continue to the end of
the programme (wash programme only).
If drying option has been selected the machine
will complete the programme without any interruption.
●
Model A1200
Note: If you have selected a synthetic wash
programme together with the reduced creases
option, the machine will automatically stop in
the final rinse and the LED will flash, press the
START/RESET button to continue to the end of
the programme (wash or wash and dry
programme).
Washer Dryer Description
GB