Filter
Top Products
4
Z-1200II: Your model includes a mounting bracket designed for overhead installation; it may be
installed at floor level or suspended overhead. If the unit is to be mounted using the bracket, it is
important that the fog does not shoot directly at any one’s face. Whatever installation method
you choose, do not allow the unit to have more than a 25 degree angle of inclination.
Z-1200II Description
Note: If you experience low output, pump noise or no output at all, unplug immediately. Check fluid level, the
external fuse, remote control connection and power from the wall. If all of the above appears to be O.K.,
plug the unit again. If fog does not come out after holding the remote button down for 30 seconds, check
the hose attached to the tank to make sure there is fluid going through the hose. If you are unable to
determine the cause of the problem, do not simply continue pushing the remote button, as this may
damage the unit. Return the machine to your ANTARI dealer.
Technical Specifications
Model
Z-1200II
Power Supply
AC 100~120V or AC 220~240V, 50/60 Hz
Power Consumption
1200 W
Output Volume
18,000 cu. ft/min.
Tank Capacity
2.5 liters
Fluid Consumption
15 min./ liter (100% output)
Weight
10.9 kgs
Dimensions (mm)
L458 W243 H177
Remote Included
Z-8
Warm-up Time
9 mins
Remote Control Operation