Filter
Top Products
27
Telephone: (508) 678-9000 Fax: (508) 678-9447
Illus. No. Part No. Qty. Description
1 100701 1 3/16" x 3/16" x 1" Key
2 101206 1 2.8 x 5/8" Pulley
3 152002 4 1/4-20 Hex Nut
4 153007 4 1/4" Lock Washer
5 154324 4 #10-32 x 1/4" Cone Point Set Screw
6 881361 2 5/8" Flange Bearing
7 881225 1 Impellor (Fan/Blower) Bearing Mount ONLY
8 101129 1 9" Pulley
9 154301 2 5/16-18 x 1” Allen (Cone Point) Set Screw
10 100705 1 3/16" x 3/16" x 1-3/8" Key
11 301850 1 Idler Shaft
12 150529 3 1/4-20 x 2-1/4" Carriage Bolt
13 --------- 4 Flanges (part of Part No. 100214 Bearing)
14 100214 2 5/8" Flange Bearing
15 150617 2 3/8-16 x 1" Hex Head Machine Bolt
16 153005 2 3/8" Lock Washer
17 153004 2 3/8" Flat Washer
18 152020 1 5/16-18 Square Nut
19 152004 1 5/16-18 Hex Nut
20 150509 1 5/16-18 x 3" Hex Head Machine Bolt
21 801016 1 Cast Idler Assembly Complete
(includes illus. nos. 10 through 23)
100406 1 Cast Idler Bearing Mount Assembly
22 153007 3 1/4" Lock Washer
23 152002 3 1/4-20 Hex Nut
24 881226 1 Impellor (fan/blower) Mount ONLY
(includes illus. no. 33)
25 153004 4 3/8" Flat Washer
26 153005 4 3/8" Lock Washer
27 150508 4 3/8-16 x 3/4" Hex Head Machine Bolt
28 153050 3 or 4 1/2" x 1-1/16" Flat Washer
29 100604 1 12-1/2” Impellor fan/blower)
30 100723 1 1/8 x 1/8 x 1 3/8'" Key
31 152006 2 1/2-20 Left Hand Jam Nut
32 353111 1 Fan Shaft
33 117604 4 Neoprene Sponge Tape (sold by the foot)
For models mfd. as of July 13, 1998
117600 4 Noise Suppressor Tape (sold by the foot)
For models mfd. prior to July 13, 1998
34 116011 1 3-1/2" x 4" Felt Bearing Seal
Impellor/Idler Bearing Assemblies
for 60 Hz Models