Filter
Top Products
6
SECTION II
SPECIFICATIONS/COMPONENT IDENTIFICATION
A. SPECIFICATIONS
Gas
Shaded areas are stated in metric equivalents
* Motor specifications are for non-reversing models only. Please consult factory for reversing specifications.
** S.A.F.E. system must be supplied with a 40 psi +/- 20 psi (2.75 bar +/- 1.37 bar) water supply.
NOTE: ADC reserves the right to make changes in specifications at any time without notice or
obligation.
MAXIMUM CAPACITY (DRY WEIGHT) 75 lbs 34 kg
BASKET (TUMBLER) DIAMETER 44-1/2” 113.03 cm
BASKET (TUMBLER) DEPTH 24-7/8” 63.18 cm
BASKET (TUMBLER) MOTOR 1hp*
0.746 kW
DOOR OPENING (DIAMETER) 31-3/8” 79.7 cm
BASKET (TUMBLER) VOLUME 22.4 cu.ft.
0.634 cu.m.
CABINET WIDTH 46-3/16” 117.32 cm
CABINET DEPTH 34” 86.36 cm
CABINET HEIGHT 84-1/4”
214 cm
EXHAUST CONNECTION 10” 25.4 cm
S.A.F.E. WATER CONNECTION** 1/2” M.N.P.T.
DRYERS PER 20’/40’ CONTAINER 8/18
DRYERS PER 48’/53’ TRUCK 25/27
VOLTAGE AVAILABLE 120-240v 1ø, 208-480v 3ø 50/60 Hz
APPROX. WEIGHT (UNCRATED) 888 lbs 402.8 kg
APPROX. WEIGHT (CRATED) 938 lbs 425.5 kg
HEAT INPUT 204,000 Btu/hr 51,408 kcal/hr
AIRFLOW 1,200 cfm 33.98 cmm
INLET PIPE CONNECTION 3/4” F.N.P.T.
050803