Filter
Top Products
17
Telephone: (508) 678-9000 Fax: (508) 678-9447
Illus. No. Part No. Qty. Description
1 100703 1 1/2 x 1/2 x 2 Key
2 101217 1 2-1/2 Bushing
(for models mfd. as of August 27, 1997)
101137 1 2-1/4 Bushing
(for models mfd. prior to August 27, 1997)
3* 100137 2 AB-91 V-Belt (to idler assembly)
4 101182 1 25 Tumbler Pulley
5 150602 4 5/8-11 x 3 Hex Head Bolt
6 153016 4 5/8 Flat Washer
7 100242 1 2-1/2 Pillow Block Bearing
(for models mfd. as of August 27, 1997)
880883 1 3-1/8 Pillow Block Bearing with Nylock Set Screws
(for models mfd. prior to August 27, 1997)
8 153016 4 5/8 Flat Washer
9 153015 2 5/8 Lock Washer
10 152010 2 5/8-11 Hex Nut
11 150600 2 3/8-16 x 1-1/2 Hex Head Bolt
12 152005 2 3/8-16 Hex Nut
13 821175 1 Tumbler Bearing Mount
(for models mfd. as of August 27, 1997)
820910 1 Tumbler Bearing Mount
(for models mfd. prior to August 27, 1997)
14 880883 1 3-1/8 Pillow Block Bearing with Nylock Set Screws
15 150604 2 1/2-20 x 3 Hex Head Bolt
16 152012 2 1/2-20 Hex Nut
17 152005 2 3/8-16 Hex Nut
18 153005 2 3/8 Lock Washer
19 153004 4 3/8 Flat Washer
20 150600 2 3/8-16 x 1-1/2 Hex Head Bolt
21 153004 2 3/8 Flat Washer
22 100801 2 5/8 Retaining Ring
23 332153 1 5/8 Hinge Pin
24 100810 1** 3-1/8 Retaining Ring
25 153018 2 1/4 Flat Washer
26 153007 2 1/4 Lock Washer
27 150512 2 1/4-20 x 1/2 Hex Head Bolt
28 824807 1 Rotational Sensor Assembly
29 880841 1 Rotational Sensor Mounting Bracket
* Replace in matched sets (both belts).
** For models mfd. prior to August 27, 1997 a quantity of 2 was used.
Tumbler Bearing Mount Assembly