Filter
Top Products
7
6. Press POWER to turn on washer
7. Select CYCLE
To add additional options to the cycle, press the button for
the desired option until light glows to add them to the
selected cycle.
NOTE: Not all options are available with all cycles. See
“Cycle Guide” for available options.
Turn cycle knob to select your wash cycle. See “Cycle Guide”
for details on cycle features. Not all options are available on
all cycles.
8. Select additional options, if desired
9. Press and hold START/PAUSE
to begin wash cycle
Press and hold the START/PAUSE button to start the wash
cycle. To pause a cycle in progress, press the START/PAUSE
button once, then press and hold again to continue the cycle.
To cancel a cycle, press the POWER button.
Door Locked
Once you press and hold START/PAUSE, you will hear
the door lock, unlock, and lock again. When the door locked
light illuminates, the door is locked. The door is locked
and unlocked automatically, depending on the stage of
the wash cycle.
Unlocking the door to add garments:
If you need to open the door to add 1 or 2 missed garments,
you may do so while the “Add Garment” light is lit.
Press START/PAUSE once; the door will unlock once the
washer movement has stopped. This may take several
minutes. Then close door and press START/PAUSE again
to continue the cycle.
To add garments after the “Add Garment” period is over, the
wash cycle needs to be canceled, the items added, and a new
wash cycle started.
Slowly close the dispenser drawer. Make sure the drawer is
closed completely, then press and hold POWER to turn on
the washer. To cancel a cycle press POWER, then the washer
powers down, the door unlocks, and clothes can be removed.
10. Remove garments promptly
after cycle is nished
Promptly remove garments after cycle has
completed to avoid odor and rusting of
metal objects on garments. When unloading
garments, pull back the door seal and check
for small items between the tub and the basket.
NOTE:
n
After any wash cycle is completed, the door must be
opened and then closed before a new cycle can begin.
n
A small amount of water may remain in the dispensers
after the wash cycle is complete. This is normal.
n
This washer has a tight seal to avoid water leaks. To
avoid odors, leave the door open to allow the washer
to dry between uses.