Filter
Top Products
7
For direct-wired dryers:
WARNING
Electrical Shock Hazard
Disconnect power before servicing.
Replace all parts and panels before operating.
Failure to do so can result in death or electrical shock.
1. Disconnect power.
2. Disconnect wiring.
3. Make sur
e leveling legs are secure in dryer base.
4. Use masking tape to secu
re dryer door.
Moving care - Gas Dryers
1. Unplug the power supply cord.
2. Close shuto
ff valve in gas supply line.
3. Disconnect gas supply line pipe an
d remove fittings attached
to dryer pipe.
4. Cap the
open fuel supply line.
5. Make sur
e leveling legs are secure in dryer base.
6. Use masking tape to secure dryer door.
Changing the Drum Light
1. Unplug dryer or disconnect power.
2. Open the dryer door. Locate the light bulb cover on the back
wall of the dryer. Remove the screw located in the lower right-
hand corner of the cover. Remove the cover.
3. Turn bulb counterclockwise. Replace the bulb with a 10-watt
appliance bulb only. Replace the cover and secure with the
screw.
4. Plu
g in dryer or reconnect power.