Filter
Top Products
3
STEP 1
STEP 2
Using the Controls - Auto Dry Models
Select Temperature
In order to select the correct temperature, turn the
Temperature control to one of four choices; Regular,
Medium (select models), Delicate or Air Fluff.
DRYER TEMPS
Regular
Medium
(select models)
Delicate
Air Fluff
LOAD TYPE
Sturdy cottons or labels marked
Tumble Dry.
For wrinkle-free/permanent press
synthetics and lightweight cottons
labeled Tumble Dry Medium.
For heat sensitive items labeled
Tumble Dry Low or Tumble Dry
Medium.
Items which need freshening.
Load tumbles with room
temperature air.
Select Options
End of Cycle Signal
W
hen the cycle is complete, a signal will sound. The
signal can be canceled by turning the switch to Off.
Remove load immediately to reduce wrinkling.
Extended Tumble (select models)
Extended Tumble is provided to minimize wrinkles in
the Auto Dry No Iron F
abrics cycle. This feature
provides an extra 60 minutes of unheated tumble
action at the end of the cycle. Clothes can be removed
any time during this por
tion of the c
ycle.
The additional 60 minutes of unheated tumbling can
be canceled by turning the switch to
Off.
Select Cycle
To select a cycle, rotate the control dial to the desired
setting. When using an Auto Dry Regular cycle, the
control dial should point between More Dry and Less
Dry for most loads.
Loads of larger or bulkier size may require the More
Dry setting to completely dry the load. T
he Less Dry
setting is best suited for lightweight fabrics or for
leaving some moisture in the clothing at the end of the
cycle.
Auto Dry Regular
T
he Auto Dry Regular c
ycle is de
signed to dry most
cottons and linens. At the end of the c
ycle, the clothe
s
are cooled to reduce wrinkling for approximately
10 minutes.
Auto Dry No Iron Fabrics
The Auto Dry No Iron Fabrics cycle is designed to dry
wrinkle-free cottons, synthetic fabrics, double knits and
permanent press fabrics automatically. At the end of
the cycle, the clothes are cooled for approximately 10
minute
s to reduce wrinkling. If the load is not removed
from the dryer and
Extended Tumble (select models)
has been selected, the cycle will advance to Extended
Tumble which provides additional unheated tumbling
time. (See Step 2).
STEP 3