Amana electronic dryer Clothes Dryer User Manual


 
6
Control panel and features
NOTE: The control panel features a sensitive surface that responds
to a light touch of your nger. To ensure your selections are registered,
touch the control panel with your nger tip, not your ngernail. When
selecting a setting or option, simply touch its name.
OPTIONS
Use to select available options for your dryer.
Control Lock
Use to lock the controls of the dryer and avoid
an accidental change in cycle options or preferences
during a drying cycle.
Touch and hold CONTROL LOCK for 3 seconds
to lock or unlock the controls of the dryer. During
this time, the LED Display will count down 3-2-1.
Once the controls are locked, the LED Display will
display “Lc.”
NOTE: The Control Lock function may be enabled
when recovering from a power failure. To unlock the
control, touch and hold CONTROL LOCK for at least
3 seconds.
5
3
2
1
5
4
1
2
3
POWER
Touch to turn the dryer on and off. Touch to stop/cancel
a cycle at any time.
CYCLE CONTROL KNOB
Turn the knob to select a cycle for your laundry load.
Automatic Cycles are Heavy Duty, Normal, and Delicates.
Manual Cycles are Quick Dry and Time Dry. See “Cycle
Guide” for detailed descriptions of cycles.
START/PAUSE
Touch and hold until the LED comes on to start a cycle,
or touch once while a cycle is in process to pause it.
LED DISPLAY AND SETTINGS
When you select a cycle, its default settings will light up
and the Estimated Time Remaining (for Automatic Cycles)
or actual time remaining (for Manual Cycles) will be
displayed. For times longer than 99 minutes, hours
will be displayed followed by minutes.
Touch TEMP or DRYNESS LEVEL to adjust cycle settings.
See “Cycle Guide” for available settings on each cycle.
Not all settings are available with all cycles.
–/+ (Adjust Drying Time)
Touch “+” or “–” with Manual Cycles to increase or
decrease the length of a Time Dry or Quick Dry cycle.
Temp
When using Manual Cycles, you may select a dry
temperature based on the type of load you are drying.
Use the warmest setting safe for the garments in the
load. Follow garment label instructions.
NOTE: Automatic Cycles use a preset temperature that
is not adjustable.
Dryness Level
When using Automatic Cycles, you may select a
Dryness Level based on the type of load you are drying.
NOTE: Dryness Level is for use with Automatic Cycles
only.
Cycle Status Lights
The indicator lights on the display will let you know
cycle and dryer status. For more information, see
“Cycle Status Indicators.”
4