Amana D2491E3B Clothes Dryer User Manual


 
Operation
Instructions
-& WARNING
To reduce the risk of fire,
electric shock, serious injury
or death to persons, read
the IMPORTANT SAFETY
INSTRUCTIONS, Pages 4
and 5, before operating the
dryer.
To Dry Clothes
IMPORTANT: Please read
instructions before using dryer.
Before using dryer for the first
time, wash out the inside of the
dryer cylinder with a sudsy cloth,
then wipe dry. Install the dryer
according to the INSTALLATION
INSTRUCTIONS. KEEP THESE
INSTRUCTIONS FOR FUTURE
REFERENCE.
1. CLEAN LINT FILTER after
each use.
2. LOAD DRYER. Open dryer
door. Shake out laundry and
place in dryer.
3. CLOSE DOOR. Dryerwill not
operate with the door open.
4. SELECT drying temperature:
The FABRIC SELECTOR
controls the drying
temperature.
FABRIC SELECTOR
NOHEAT
I
©
REGULAR
IMPORTANT: The heat on the
DELICATE setting is not sufficient
to remove wrinkles from
permanent press.
5. SELECT TIMER SETTING in
cycle desired: AUTOMATIC
PERMANENT PRESS/KNITS,
AUTOMATIC REGULAR,
AUTOMATIC DELICATE,
TIME DRY or NO HEAT.
These cycles control the drying
time.
The Energy Saver settings,
marked with a dot (.), show which
dryer settings will use the least
energy.
6. START DRYER: Push the
timer knob in.
TO STOP DRYER AT ANY
TIME, open door or turn timer
knob to an OFF position.
TO RESTART DRYER, close
door, reset timer if necessary, and
push the timer knob in. Your dryer
is designed so that itwill not
operate if the door is open.
7. SET SIGNAL CONTROL:
Rotate selector to "loud"
(loudest sound) or to "off" (no
sound) or to any level in
between.
In the Automatic Permanent
Press/Knits cycle, the signal
will buzz for a short period of
time at the end of cool down. If
clothes are not removed at
that time, the timer will
advance into the Cool Tumble
cycle, where the signal will
buzz for a short period of time
for every five minutes of the 15
minute cycle before dryer
stops.
In the Automatic Regular,
Automatic Delicate, Time
Dry and No Heat cycles, the
signal will buzz for a short
period of time at the end of the
cool down.
The signal willstop when the
door is opened, or when the
timer is advanced to an OFF
position,
SIGNAL
LtlJ
©
NO HEAT
Control Panel Light
An optional controlpanel light kit is
available for your dryer. This kit will
provide additional light to your
control panel and improve visibility
of the controls in a dimly lit
environment.
To order the Control Panel Light
Kit (Part No. LFLI) contact your
dealer. For more information call
1-800-843-0304.
10 503276