Nilfisk-ALTO SCRUBTEC R 586 Clothes Dryer User Manual


 
CLARKE TECHNOLOGY Operator's Manual -
SCRUBTEC R Manual SteeringSCRUBTEC R Manual Steering
SCRUBTEC R Manual SteeringSCRUBTEC R Manual Steering
SCRUBTEC R Manual Steering
Page -5-
Introduction
Introduction & Machine Specifications
This is a floor cleaning machine which, using the mechanic abrasive action of brushes or pads and the chemical
action of a water-detergent solution, is able to clean any type of floor. During its forward movement, it picks up
the removed dirt and the detergent solution which has not been absorbed by the floor.
English Correct Disposal of This Product (Waste Electrical & Electronic Equipment)
(Applicable in the European Union and other European countries with separate
collection systems)
This marking shown on the product or its literature, indicates that it should not be disposed with
other household wastes at the end of its working life. To prevent possible harm to the
environment or human health from uncontrolled waste disposal, please separate this from other
types of wastes and recycle it responsibly to promote the sustainable reuse of material resources.
Household users should contact either the retailer where they purchased this product, or their
local government office, for details of where and how they can take this item for environmentally
safe recycling.
Business users should contact their supplier and check the terms and conditions of the purchase
contract. This product should not be mixed with other commercial wastes for disposal.
Model SCRUBTEC R 571 SCRUBTEC R 586 SCRUBTEC R 571 C SCRUBTEC BOOST
®
R
Part Number
Cleaning Swath 28” (71.1 cm) 34” (86.4 cm) 28” (71.1 cm) 32” (81.3 cm)
Power Supply 36 volt system using (6) 6 volt 250, 330, or 370 AH deep cycle batteries
Battery Charger On-Board fully automatic smart charger, 115V 60 Hz or 230V 50 Hz
Brush Motors (1) 2 hp (1.5 kW) driving (1) 2.5 hp (1.9 kW) driving (2) .75 hp (.56 kW) (1) .75 hp (.56 kW)
two right angle gearboxes two right angle gearboxes
Brush Size / Speed (2) 14” (36 cm) 300 RPM (2) 17” (43 cm) 300 RPM (2) 6 x 28” (15.2 x 71.1 (1) 14 x 32” (35.6 x 81.3
cm) 300 RPM cm) 2250 RPM
Brush Pressure 12 -225 lbs. (57-102 kg) 90-130 lbs. (41-59 kg) 115-155 lbs. (52-70 kg)
Traverse Speed
(max)
4.1 mph (6.6 kph)
Traverse 1.5 hp (1.1 kW) transaxle powering of two 10” (25.4 cm) diameter rear wheels
Max. Cleaning Grade 6 degree
Vacuum Motor 1 hp (.75 kW) 3 stage tangential discharge
Noise Level 70 dBA
Solution Tank 30 gallon (113 liter)
Recovery Tank 30 gallon (113 liter)
Length 65” (165 cm)
Width 33” (84 cm) 35.5” (90 cm) 30” (130 cm) 33” (84 cm)
Height 56” (142cm)
Machine Weight
w/330 AH batteries 1478 lbs. (670 kg) 1498 lbs. (679 kg) 1498 lbs. (679 kg) 1488 lbs. (675 kg)
& full of solution
Warranty 8 years Polydur
TM
tanks, 3 years parts, 1 year labor, 18 months pro-rated batteries