Filter
Top Products
Page -72- CLARKE TECHNOLOGY
Operator's Manual -
SCRUBTEC R Manual SteeringSCRUBTEC R Manual Steering
SCRUBTEC R Manual SteeringSCRUBTEC R Manual Steering
SCRUBTEC R Manual Steering
CLARKE TECHNOLOGY LIMITED U.S. WARRANTY
This Clarke Technology Industrial/Commercial Product is warranted to be free from defects in materials and workman-
ship under normal use and service, when operated and maintained in accordance with Clarke Technology’'s Maintenance
and Operations instructions. The warranty period is subject to the conditions stated below.
3 YEARS FOR PARTS AND 1 YEAR FOR SERVICE LABOR (See exceptions below)
Motors must be inspected for carbon motor brush wear at six-month intervals by an authorized Clarke Technology repair
station. Failure to comply with the six-month inspection requirement or failure to replace worn motor brushes identified
during the inspection will void the warranty on the motors. Cost of the six-month inspection and replacement of carbon
motor brushes is the responsibility of the purchaser. In the event of a warranty claim on the motors, proof of inspection and
any required motor brush replacement must be provided. This warranty is extended only to the original purchaser for use
of the product. It does not cover normal wear parts such as electrical cable, rubber parts, hoses and motor brushes.
BATTERY WARRANTY
In addition to the items above, any original equipment Clarke Technology Battery which becomes unserviceable under
normal use within a period of ninety (90) days from date of sale to the original user will be repaired or replaced with one of
equal specification at our option, F.O.B. any authorized Clarke Technology Sales or Service Branch, with no charge to the
user, except transportation costs. After expiration of the above ninety (90) day period, any battery which fails under
normal use will be adjusted to the original user with a new battery of equal specification on an eighteen (18) months pro rate
basis from the date of purchase. Adjustment will be determined using the then current list price, plus transportation costs.
Warranty is rendered null and void if battery is not kept filled to the proper level with DISTILLED WATER.
CLARKE TECHNOLOGY: POLYDUR
®
AUTOMATIC SCRUBBER SOLUTION AND RECOVERY TANK EIGHT-
YEAR U.S. GUARANTEE
Your new Clarke Technology machine has polydur Solution and Recovery Tanks. Polydur is a rotationally molded, low-
density linear polyethylene that won't crack or dent, and withstands most corrosives and temperature extremes. Clarke
Technology backs up your Polydur tanks with an eight-year guarantee. If a tank breaks or leaks under normal use
within eight years of the date of purchase, it will be replaced free.
CLARKE TECHNOLOGY UNIBODY FRAME FIVE-YEAR U.S. WARRANTY
Clarke Technology warranties the frame for a period of five years against defects in materials and workmanship under
normal use and service.
STATED WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES, EXPRESSED OR IMPLIED
Clarke Technology's liability under this warranty is limited to repair of the product and/or replacement of parts and is given
to purchaser in lieu of all other remedies, including INCIDENTAL AND CONSEQUENTIAL DAMAGES.
THERE ARE NO EXPRESS WARRANTIES OTHER THAN THOSE SPECIFIED HEREIN. THERE ARE NO WARRANTIES WHICH
EXTEND BEYOND THE DESCRIPTION OF THE FACE HEREOF. NO WARRANTIES, INCLUDING BUT NOT LIMITED TO WAR-
RANTY OF MERCHANTABILITY, SHALL BE IMPLIED. A warranty registration card is provided with your Clarke Technology
product. Return the card to assist Clarke Technology in providing the performance you expect from your new floor
machine.
If a difficulty develops with the product, you should: a) Contact the nearest authorized Clarke Technology repair location or
contact the Clarke Technology Service Operations Department, 2100 Highway 265, Springdale, Arkansas 72764, for the
nearest authorized Clarke Technology repair location. Only these locations are authorized to make repairs to the product
under this warranty. (b) Return the product to the nearest Clarke Technology repair location. Transportation charges to and
from the repair location must be prepaid by the purchaser. Clarke Technology will repair the product and/or replace any
defective parts with out charge within a reasonable time after receipt of the product.
ALTO, 2100 Highway 265, Springdale, Arkansas 72764.
ALTO reserves the right to make changes or improvements to its machine without notice.
Always use genuine ALTO Parts for repair.
2100 Highway 265
Springdale, Arkansas, 72764