Filter
Top Products
Installation
26
F232060© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
.
Note: The X voltage is not compatible with
CE and/or electric heat models.
IMPORTANT: For machines with X
voltage: If input power is single-phase,
connect L1 to L1 of terminal block and L2
to L2 of terminal block. Leave L3
unconnected on the input terminal block. If
input power is three-phase, connect L1, L2
and L3 to L1, L2 and L3 of the terminal
block.
Cabinet Freestanding
Electrical Specifications
Voltage Designation Standard Electric Heat
Model
Code
Voltage
Cycle
Phase
Wire
Full Load
Amps
Breaker
AWG
mm
2
Full Load
Amps
Breaker
AWG
mm
2
18
X 200-240 50-60 1 or
3
2 or
3
6/4 15 14 2x2.5
3x2.5
-- -- -- --
P* 380-415 50-60 3 3 3 15 -- 3x2.5 12 15 -- 3x2.5
Q 200-240 50-60 3 3 5 15 14 -- 18 20 12 --
T* 200-240 50-60 1 2 8 15 14 -- 31 35 8 --
25
X 200-240 50-60 1 or
3
2 or
3
11/6 15 14 2x2.5
3x2.5
-- -- -- --
P* 380-415 50-60 3 3 3 15 -- 3x2.5 12 15 -- 3x2.5
Q 200-240 50-60 3 3 7 15 14 -- 18 20 12 --
T 200-240 50-60 1 2 12 15 14 -- 31 35 8 --
Note: Wire sizes shown are for copper, THHN, 90° conductor per NEC article 310.