Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
9
9001910
Preliminary Information
About the Control
WE-8 B-control on the washer-extractor is an
advanced, programmable computer that allows the
owner to create wash programs.
The control is factory set-up with 8 pre-programmed
cycles and is ready for operation. Refer to
Pre-Programmed Cycles section in the Programming
manual.
WE-8 B-control allows the owner to program custom
cycles on the machine or with a PC and the Alliance
planner software.
IMPORTANT: In the event of a power failure, WE-
8 B-control will not have to be reprogrammed. It is
designed with a memory system that will remember
how it was programmed until the electrical power
is restored.
Power Failure Recovery
If a cycle in process and the power fails, the user has
one minute to press START (enter) to continue the
cycle. If START (enter) is not pressed within the
minute, program will drain water and basket will not
rotate (safe mode). Control will test speed sensor by
steering the wash speed for a brief time. When no
speed is detected, control will proceed as if the speed
detector failed and the machine cannot be opened until
the three minute power failure wait period is done.