Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation/Operation Supplement
11
9002062 (EN)
Removing the Transport Block
To prevent damage during transportation, machine has
been equipped with a transport block. To remove,
proceed as follows:
1. Place machine on level ground.
2. Remove service panels and back panel.
3. At rear of machine, lift at bottom of motor and
remove transport block. Refer to Figure 4.
Figure 4
IMPORTANT: Do NOT lift motor by the pulley.
IMPORTANT: Do NOT remove panel braces.
Refer to Figure 5.
Figure 5
4. Replace all panels removed.
CFD26N
1 Transport Block (Remove)
The machine must never be activated
before removing the transport block.
W618
WARNING
CFD26N
1
CFS486N
1 Panel Braces (Do NOT Remove)
CFS486N
1