Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Installation
11
38910
Sink Installation
For this type of installation, use the beaded tie-down
strap (supplied in accessories bag), or use a large wire
tie (available from your local hardware store) and
secure the drain hose to the cabinet top hinge. Refer to
Figure 9. This will prevent the drain hose from
dislodging during use.
We recommend leaving the standpipe adapter on the
drain hose for this type installation.
Figure 9
In the Wall Installation
For installations of this type, the drain hose MUST be
secured to one of the inlet hoses using the beaded tie-
down strap from accessories bag.
NOTE: End of drain hose must not be below height
of cabinet top.
Figure 10
TLW1963N
1 Drain Hose
2 Cabinet Top Hinge
3 Tie-Down Strap or Wire Tie
1
2
3
W329I
1 Tie-Down Strap (Tape if necessary)
2 Standpipe Adapter
1
2