Filter
Top Products
685945 5
Dimensions and Specifications . . .
Additional Security . . .
Torx security screws are available (as optional equipment
at extra cost) for securing lower access panel to washer.
Order part number 62853.
A Torx bit, part number 282P4, is available (as optional
equipment at extra cost) for installing the Torx security
screws.
A Torx bit holder, part number 24161, is available (as
optional equipment at extra cost) to be used with the Torx
bit.
Coin Slide Guards . . .
(Coin Slide Models Only)
Using serrated hex head screws from accessories bag,
install coin slide guard to front of control cabinet. See
illustration.
A special security screw kit is available (as optional
equipment at extra cost) for securing the coin slide guard
and front panel to front of washer. Order Security Kit
No. 298P3. A special driver, part number 56217, is
available (as optional equipment at extra cost) for
installing the special security screws.
NOTE: Coin slides and coin drawers are shown for
illustration only. You must obtain them locally.
26.9" (68.3 cm)
28" (71.1 cm)
43" (109.2 cm)
29.6" (75.1 cm)
2"
(5.1 cm)
31.1" (79 cm)
14.3"
(36.3 cm)
17.5"
(44.8 cm)
H270IE3a
3
2
1
OPERATING INSTRUCTIONS
Select Wash Temperature
HOT, WARM, COLD.
Select Fabric Type
NORMAL, PERM PRESS, DELICATE.
Load Supply Dispenser (See Instructions Below).
Load Clothes.
Insert Coin(s) / Card.
To Start Washer-Close Door and Push Start.
1.
2.
3.
4.
5.
6.
Open Dispenser Door.
Load Supplies in Proper
Compartment (as Indicated).
Close Dispenser Door.
1.
2.
3.
Detergent
Liquid Bleach
Fabric Softener
1.
2.
3.
DISPENSER INSTRUCTIONS
PERMANENT PRESS ALL FABRIC
685942
H174I
685557