Alliance Laundry Systems DRY2033N Clothes Dryer User Manual


 
-6-
802716
Before Drying
Energy Saving Tips
Make sure the lint filter is always clean.
Do not overload the dryer.
Do not overdry items.
Remove items to be ironed while still damp.
Large loads of similar fabrics dry the most
efficiently. However, dry permanent press in
smaller loads to prevent wrinkling.
Use the correct cycle for the type of fabric
being dried.
Locate your dryer so the exhaust duct is as
short and straight as possible.
Do not open the door during the drying cycle.
Plan to do your laundry on low humidity days;
your clothes will dry faster.
Dry multiple loads of clothes one right after
another so dryer interior does not have to be
reheated for each load.
Helps and Hints
The directions for installation and proper
exhausting are given in the Installation
Instructions which are included with the
dryer.
Static electricity may cause garments of
synthetic fibers (as in lingerie) to cling
together, especially if they are overdried. The
use of a liquid fabric softener in the rinse
water of the washer, or a fabric softener
sheet in the dryer, will soften clothes and
reduce static electricity.
Do not wash or dry clothes that shed lint in
the same load with permanent press or knit
garments.
Remove permanent press loads immediately
after dryer stops.
Follow the care labels on FLAME
RETARDANT, SCOTCH- GUARD™, etc.,
garments for the proper washing and drying.
If loads should be damp for ironing, turn
timer knob to the ENERGY SAVER setting,
marked with a dot (), in AUTOMATIC or TIME
DRY cycles.
Sort
If you have correctly sorted the items for
washing, they should be properly sorted for drying
too.
1. Sort by color.
2. Separate lint shedding fabrics and lint
receiving fabrics.
Towels, flannels, chenille, cottons, rugs, etc., shed
lint. Corduroys, knits (including socks), permanent
press, and synthetics attract lint.
3. Separate no heat, low heat and high heat
items.
In any kind of drying, lightweight fabrics will dry
faster than heavyweight fabrics. If mixed loads
are dried together (such as sheets and towels),
remove the lighter weight fabrics when they are
dry to prevent overdrying and wrinkling. The best
method is to dry clothes which require the same
time and temperature in the same load.
TLW1991N
TLW1991N