Alliance Laundry Systems DRY2025 Clothes Dryer User Manual


 
-12-
513123
To D r y C l o t h e s
IMPORTANT: Refer to the INSTALLATION
INSTRUCTIONS before using dryer.
IMPORTANT: Before using dryer for the first
time, use an all-purpose cleaner or a detergent
and water solution and a damp cloth to remove
shipping dust from inside of dryer drum.
1. Sort items into separate loads.
IMPORTANT: Remove all sharp objects from
laundry to avoid tears and rips to items during
normal machine operation.
2. Remove lint filter cover, clean lint filter and
replace cover.
3. Add clothes loosely into dryer drum. Add
fabric softener sheet, if desired.
NOTE: To avoid damage to dryer, do not use
more than one fabric softener sheet per load.
4. Close loading door. Dryer will not operate with
the door open.
5. Select Fabric Selector. Follow garment
manufacturer’s care labels for recommended
temperature settings.
6. Select timer setting in cycle desired. These
cycles control the drying time.
The ENERGY SAVER settings, if applicable,
marked with a dot (
), show which dryer settings
will use the least energy and will leave items damp
for easier ironing.
7. Push timer knob in to start dryer.
NOTE: To stop dryer at any time, open the door
or turn timer knob to an OFF position. To
restart dryer, close door, reset timer if
necessary, and push in the timer knob.
End of Cycle Signal (available on select
models only)
The volume of the signal tone may be set on OFF,
LOUD or between the two selections. If a volume
level is selected, the signal will let you know when
the cycle is done. The signal will stop when the
door is opened or when the timer is advanced to
an OFF position.
TLW1991N
TLW1991
DRY2025
TLW2032N
DRY2026N
DRY2026N