Filter
Top Products
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Basic Installation/Operation
23
9001014
Machine Foundation
Thoroughness of detail must be stressed with all
foundation work to ensure a stable unit installation.
eliminating possibilities of excessive vibration during
extract.
The washer-extractor must be placed on a smooth
level surface so that the entire base of the machine is
supported and rests on the mounting surface.
The standard installation does not require anchoring
unless mandated by state or local codes.
Static and dynamic loads on the floor or foundation are
shown in Table 2.
Table 2 can be used as a reference when designing
floors and foundations.
Ensure that the machine is installed on a
level floor of sufficient strength and that
the recommended clearances for
inspection and maintenance are provided.
Never allow the inspection and
maintenance space to be blocked.
W488
CAUTION
Floor Load Data
Model 18253335405575100135165200
Kinetic Energy of
the Cylinder,
(N/m)
1386 1730 2736 3240 4105 6640 12404 18361 23257 29581 29581
Dynamic Bottom
Load, (N/Hz)
700/16 750/16 1200/16 1200/16 1200/16 1700/15 2000/15 2960/13 3900/13 4960/13 6100/13
Table 2