Filter
Top Products
Page 12 of 12
© Copyright, Alliance Laundry Systems LLC – DO NOT COPY or TRANSMIT
Loading Door Strike
The loading door strike must be adjusted to have
sufficient tension to hold loading door closed against
force of load tumbling against it. Proper adjustment is
when 8-15 pounds (35.6-66.7 N) pull is required to
open door.
If adjustment is required, refer to Figure 4 and proceed
as follows:
To adjust, open door, loosen adjustment screws and
position strike for desired magnet engagement.
retighten screws.
Figure 4
Belt Drive
NOTE: Proper tensions for new belts are
45-55
pounds for the motor belt, 55-65 pounds for
the final drive and 65-70 pounds for 200 pound
blower, measured with a Borroughs Belt Tension
Gauge. Using a Browning Belt Tension Gauge, the
motor belt deflection should be 0.31
inch at five
pounds pressure, and final drive belt deflection
should be 0.25
inch at five pounds pressure.
TMB2359N
1 Door Strike
2 Adjustment Screws
1
2