Filter
Top Products
Cancelling a programme
To cancel a programme which is running, turn the programme selector
dial to the RESET O position.
Warning! After a programme which ends with water in the drum
(RINSE HOLD option ), turn the selector dial first to O and then to
the DRAIN programme “C”.
Altering a programme which is running
To alter a programme, first set the machine to PAUSE by pressing the
START/PAUSE button .
Any function can be modified before the machine starts it. After select-
ing the new option press the START/PAUSE button again to re-start the
selected programme.
To modify the selected programme turn the programme selector dial to
O and then choose a new programme.
The water is not emptied out and after pressing the START/PAUSE but-
ton again the machine restarts with the newly selected programme.
Opening the door after the programme has started
To open the door set the machine to PAUSE by pressing the START/PAUSE
button.
The door can be opened if:
• the machine is not already heating or drying;
• the water level is not above the bottom edge of the door;
• the drum is not turning.
The light (DOOR) on the control panel indicates if the door can
be opened:
• green light: the door can be opened;
• unlit light: the door cannot be opened;
• flashing red light: the door is open.
16
Description of the appliance
132993360 gb.qxd 10/25/02 9:26 AM Pagina 16 (Nero/Process Black pellicola)