Filter
Top Products
23
Smoething not working?
Problem Possible cause
Remedy
The drying cycle
exceptionally takes a
long time
The loading door
cannot be closed
The drier ends the dry-
ing cycle automatically:
END indicatoris illumi-
nated shortly after pro-
gramme start
Vented air transport disrupted
Straighten N- air venting hose
and/or clean air venting ducts
Lint filter blocked
Clean lint filter
Lint filter not installed and/or fil-
ter lid not locked in position
Install lint filter and/or lock filter lid
in position
Too little or too dry laun-
dry loaded for selected
programme
Select time programme or hig-
her drying level (for instance
EXTRATROCKEN instead of
STARKTROCKEN)
The drying cycle excep-
tionally takes a long
time. 4,5 hours after
starting the drying cycle:
END indicator is illumi-
nated - drying cycle is
aborted - programme
run indicator flashes
SCHON- button depressed and
filling quantity too large
Check programme selection: only use
SCHON -button for laundry quanti-
ties up to 3 kg. Clean lint filter.
Reduce filling quantity
Filling quantity too large
Pre-dry laundry more thorougly
Laundry too wet
If these operating instructions do not offer sufficient advice to eli-
minate a specific fault, please contact our customer service.
125981081.qxp 2005-04-13 10:49 Page 23