Filter
Top Products
Something not working?
24
Something not working?
If the tumble dryer is not working correctly please carry out the follow-
ing checks before calling an engineer.
If you do not find the required information in this manual to remedy a
disturbance, please call the customer service.
Symptom Possible cause Solution
The tumble dryer will not start
The appliance is not
plugged in
Plug in the appliance
The fuse has blown Check the fuse
The START button has not
been pressed
Press the START button
No program has been
selected
Select the required
program
The door is not properly
closed
Close the door
The results are unsatisfactory
The wrong program has
been selected
Select a different
program
Fluff filter blocked Clean the fluff filter
The tumble dryer has
been overloaded
Observe the maximum
loads stated for each
program
Laundry not sufficiently
spun prior to tumble
drying
Ensure the wash load is
well spun before tumble
drying
A residue may have
formed on the drum
interior, blocking the
sensors
Clean the inside of the
drum with white vinegar
The drying process takes
unusually long
Spent air removal
disturbed
Make sure that there are
no kinks in the spent air
hose and/or clean the
spent air removal ducts
Fluff filter is clogged Clean the fluff filter
The door cannot be closed
Fluff filter has not been
inserted correctly and/or
the filter lid not closed
Replace the fluff filter
and ensure the filter lid is
closed