Filter
Top Products
Something not working?
If a problem occurs, you can try to solve it yourself following the instructions
below. If you call out an engineer when one of the following problems occurs,
or to repair a fault due to incorrect use, the call-out will be charged even if
requested within the guarantee period.
If you cannot find any useful information in these operating instruc-
tions to solve your problem, please contact our nearest service centre.
40
Problem
The dryer does not
work.
Possible cause
The programme selector has not been set correctly.
The plug is not connected.
The main fuse has blown.
The door is not properly closed.
The programme selected is not correct.
Clean the fluff filter.
Follow the load indications.
The laundry was not adequately spun.
Clean the fluff filter.
Unsatisfactory
drying results.
The drying cycle is
too long.