Filter
Top Products
Quantity of detergent to be used
The type and quantity of detergent will depend on the type of fabric, load size, degree of
soiling and hardness of the water used.
Follow the product manufacturers’ instructions on quantities to use.
Use less detergent if:
• you are washing a small load
• the laundry is lightly soiled
• large amounts of foam form during washing.
Degrees of water hardness
Water hardness is classified in so-called “degrees” of hardness. Information on hardness of
the water in your area can be obtained from the relevant water supply company, or from
your local authority. If the water hardness degree is medium or high we suggest you to
add a water softener following always the manufacturer’s instructions. When the degree
of hardness is soft, readjust the quantity of the detergent.
Washing programmes
Programme
Maximum and Minimum Temperature
Cycle Description
Maximum Fabrics Load
Type of Laundry
Options
Detergent Com-
partment
COTTONS/LINEN
95° - Cold
Main wash - Rinses - Long spin at the maximum speed
Max. load 7 kg - Reduced load 3,5 kg
White and coloured cotton (normally soiled items).
SPIN REDUCTION
RINSE HOLD
STAIN
1)
SENSITIVE
TIME SAVING
2)
EXTRA RINSE
COTTONS WITH PREWASH
95° - Cold
Prewash - Main wash - Rinses - Long spin at the
maximum speed
Max. load 7 kg - Reduced load 3,5 kg
White or coloured cottons with prewash phase
(heavily soiled items).
SPIN REDUCTION
RINSE HOLD
STAIN
1)
SENSITIVE
TIME SAVING
2)
EXTRA RINSE
3)
40 - 60 MIX
40°
Main wash - Rinses - Long spin at the maximum sped
Max. load 7 kg
White and coloured cotton This programme can be
used for laundry, which should be washed at 40°C or
60°C separately. The maximum load capacity can be
put into the drum in order to save energy and water.
The same good washing result will be obtained as for
normal programme at 60°C.
SPIN REDUCTION
RINSE HOLD
STAIN
SENSITIVE
EXTRA RINSE
Washing programmes
15