Filter
Top Products
12. Replace the plastic spacers with
the plastic caps. You can find these
caps in the user manual bag.
WARNING!
Remove all the packaging and
the transit bolts before you in-
stall the appliance.
We recommend that you keep
the packaging and the transit
bolts for when you move the ap-
pliance.
POSITIONING AND LEVELLING
x4
• Install the appliance on a flat hard
floor.
• Make sure that carpets do not stop
the air circulation below the appli-
ance.
• Make sure that the appliance does
not touch the wall or other units
• Loosen or tighten the feet to adjust
the level. A correct adjustment of the
appliance level prevents the vibra-
tion, noise and the movement of the
appliance when in operation.
• The appliance must be level and sta-
ble.
CAUTION!
Do not put cardboard, wood or
equivalent materials below the
appliance feet to adjust the lev-
el.
Make sure that there is sufficient
access after the installation for
possible repairs by a qualified
person.
32