Filter
Top Products
20
Use
Select the TIME SAVING option (button 6)
The washing machine proposes by default the washing cycle for «Normally soiled
laundry». The washing cycle can be shorted by means of this button.
This option can be selected with the washing programmes for COTTONS,
SYNTHETICS and DELICATES.
By pressing this button once, the corresponding symbol and the message DAILY
appear on the display and you will be able to short the washing duration for
«Daily soiled laundry». The display will show the shorted washing time. To be used
for daily soiled laundry.
By pressing this button twice, the corresponding symbol and the message SUPER
QUICK will appear on the display and you will be able to short the washing
duration for «lightly soiled laundry». The display will show the shorted washing
time.
To be used only for very lightly soiled laundry.
Select the START/PAUSE (button 8)
Press this button, to start the selected programme. The corresponding red pilot
light stops blinking.
On the display will appear the name and the running phase of the selected
programme to indicate that the appliance starts operating and the door is
locked.
To interrupt a programme which is running, depress the button
8: the
corresponding red pilot light starts to flash, while the message «PAUSED»
appears on the display to indicate that the machine is in pause.
To restart the programme from the point at which it was interrupted, press the
button
8 again.
If you have chosen a delayed start, the machine will begin the countdown.
Select the DELAY START (button 9)
This option makes it possible to delay the starting of the washing programme by
30, 60, 90 minutes, 2 hours and then by 1 hour till 20 hours.
Selecting the delay time:
● Select the programme and the required options;
● Select the desidered delay time by pressing the button 9, the display shows
the delay value and the relevant symbol
7.8.
The extimated end of the programme time is displayed in
7.7.
● Press the button 8: the machine starts its countdown displayed in 7.8. The
programme will start after the selected delay has expired.
132966571.qxd 21/01/2008 16.14 Pagina 20