Filter
Top Products
21
Memory 1, 2, 3
Programme combinations can be stored at programme knob positions
MEMORY 1, 2, 3 and can then be selected using the programme knob.
To do this the desired programme combination is first put together and
then stored.
Setting the Memory
Example: Programme posi-
tion MEMORY 1 is to be giv-
en the following programme
combination: LINEN/EASY
CARES 40 °C, 800 rpm, with
PREWASH.
1.Turn the programme knob to
LINEN/EASY CARES.
2.Press the TEMP. key repeatedly, until 40 °C appears in the display.
3.Press the RPM key repeatedly, until 800 appears in the display.
4.Using the OPTIONS key set PREWASH and press the OK key. A black
bar appears under the PREWASH symbol .
5.Press the OPTIONS key repeatedly, until the SETUP symbol flashes.
6.Press the OK key. The display
changes to the Special Func-
tions level. Programme
memory position MEMORY 1
is offered first.
3 To change to another memo-
ry position, press the OP-
TIONS key.
7.Press the OK key.
The programme combination is now stored to programme knob posi-
tion MEMORY 1 and in the future can be selected directly using the
programme knob.
3 The Memory can be overwritten at any time with a new programme
combination (see “Changing the Memory”), but cannot be deleted.
Changing the Memory
1.Put together the new programme combination as required (for an ex-
ample, see “Setting the Memory”, steps 1 to 4).
2.Press the OPTIONS key repeatedly, until the SETUP symbol flashes.
3.Press the OK key.
LINEN/EASY CARE
12.45
Cycle end at
14.37
40C 800 aýýýýýVýaýaýaýaýaýaýaýa
TEMP. RPM OPTIONS OK TIME
Memory 1
Store program
aýýýýýaýaýaýaýBýaýaýaýa
TEMP. RPM OPTIONS OK TIME