Filter
Top Products
CHANGE A PROGRAMME
To change a programme, push the On/
Off button to deactivate appliance.
Push the On/Off to activate the appli-
ance and then set the programme
again.
AT THE END OF PROGRAMME
When the drying cycle is completed,
the
symbol flashes on the display. If
the Buzzer function is on, an acoustic
signal sounds intermittently for one mi-
nute.
To remove the laundry:
1. Push the On/Off button for 2 sec-
onds to deactivate the appliance.
2. Open the appliance door.
3. Remove the laundry.
4. Close the appliance door.
After each drying cycle:
• clean the filter
• drain the water container
(See chapter CARE AND CLEANING.)
16