Filter
Top Products
CAUTION!
Do not lock the laundry in be-
tween the appliance door and
rubber seal.
SWITCHING ON THE
APPLIANCE
Push the On/Off button to activate or to
deactivate the appliance. When the appli-
ance is on, some indications come in to
the view on the display.
AUTO STAND-BY FUNCTION
To decrease the energy consumption, the
automatic stand-by function deactivates
the appliance:
• if the Start/Pause button was not push-
ed in the time of 5 minutes.
• after 5 minutes from the programme
end.
Push the On/Off button to activate the
appliance.
SETTING A PROGRAMME
Use the programme dial to set the pro-
gramme. The possible time to complete
the programme come into view on the
display.
The drying time you see is related
to the load of 5 kg for cotton and
jeans programmes. For the other
programmes the drying time is re-
lated to the recommended loads.
The drying time of the cotton and
jeans programmes with the load
more than 5 kg is longer.
SPECIAL FUNCTIONS
Together with the programme you can set
1 or more special functions.
To activate or deactivate the function
push the applicable push button.
When the function is activated the LED
above the push button comes into the
view.
THE DELICATE FUNCTION
To dry more lightly the sensitive and tem-
perature sensitive textiles (e.g. acrylic, vis-
cose). For fabrics with the symbol
on
the fabric label. Programme operates with
decreased heat.
THE BUZZER FUNCTION
When the buzzer function is activated you
can hear the buzzer at the:
• cycle end
• anti-crease phase start and end
• cycle interruption
The buzzer function is by default always
on. You can use this function to activate
or deactivate the sound.
THE ANTICREASE FUNCTION
Extends anticrease phase (30 minutes) at
the end of the drying cycle to 90 minutes.
This function prevents laundry from crea-
ses. Laundry can be removed during the
anticrease phase.
THE DELAY START FUNCTION
Let to delay the start of a drying
programme from minimum of 30
minutes to maximum of 20 hours.
1.
Set the drying programme and func-
tions.
2.
Push the Delay start button again and
again until the necessary time of the
delay come into the view on the dis-
play (e.g.
if the programme has
to start after 12 hours.)
3.
To activate the Delay start function,
push the Start/Pause button. The time
to start decreases on the display.
ENGLISH
11