Filter
Top Products
66
Starting the programme
1. Check that the water tap is open and the door is closed.
2. Press START/PAUSE to start the programme.
If the Delay Start option has been selected the programme will start
at the end of the countdown.
If the light FIN (END) is flashing at the start of the programme it indi-
cates that the door is open. Close the door and press the START/PAUSE
button again.
If the delay start option has been selected, the machine starts its
countdown, in hours for the first two hours and then every 30 min-
utes, which will appear on the display. During this period it is possible
to load other laundry, or to cancel the delay time.
• Load other laundry: press the START/PAUSE button. Open the door.
Load the laundry. Close the door and press the START/PAUSE button
again.
• Cancel the delay time: press the START/PAUSE button. Press the
DELAY START button until the symbol 0’ appears on the display.
Press the START/ PAUSE button again if you wish to restart the pro-
gramme.
Programme progress display
By selecting the wash programme, the pilot lights corre-
sponding to the various phases making up the programme
come on. After the machine has started, only the running
phase pilot light stays on.
Display
The time to the end of the programme decreases minute by minute and
appears on the display.
How to wash
RINSES
EXTRA
RINSE
SPIN
END
DOOR
PREWASH/
WASH
OVER-
DOSAGE
PRELAVADO/
LAVADO
SOBRE DOSIF.
ACLARADO
ACLARADO
CENTRIFUGAR
FIN
PUERTA
132974550_gb.qxd 01/02/2007 13.37 Pagina 66