AEG 60820 Washer User Manual


 
By depressing at the same time buttons PRÉ-LAVAGEM and TRATAMEN-
TO DAS NÓDOAS the acoustic signal at the end of programme is switched
off.
SPIN SPEED
Press this button to reduce the maximum
speed of the final speed proposed by the
machine for the selected programme or to
select option STOP-NÃO ESGOTA (RINSE
HOLD).
RINSE HOLD (STOP-NÃO ESGOTA)
By selecting this option, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished, the
pilot light FIM (END) on the programme progress display illuminates to
indicate that the water must be emptied out.
To empty out water:
press the START/PAUSE button: after emptying, the machine performs
the spin cycle required for the type of wash selected;
select the DRAIN programme DESCARGA to empty out the water with-
out spinning.
Warning! The programme selector dial must be turned first to RESET O
and then to the DRAIN programme.
If the water is not emptied out, the machine automatically empties
itself after 18 hours.
Display
The display shows the following information:
Duration of the selected programme (in minutes), calculated automat-
ically on the basis of the maximum recommended load for each type of
fabric.
• When the programme has finished, a steadily lit zero is displayed.
Delayed start, (19 hours max.) programmed using the special button.
The countdown is updated every hour.
Alarm code indicating a fault in the machine operation (see page 75).
57
Description of the appliance
1200
1000
900
700
STOP-N
Ã
O
ESGOTA
400
850
700
600
400
STOP-N
Ã
O
ESGOTA
132996510.qxd 11/07/01 15.30 Pagina 57 (Nero/Process Black pellicola)