Filter
Top Products
Operating instructions
20
Changing the Spin Speed/Selecting Rinse Hold
0 If desired, reduce the spin speed for the final spin or
select rinse hold:
– Press the button for the required spin speed
– press the o (RINSE HOLD) button.
The indicator for the required spin speed (or o )
illuminates.
If o (RINSE HOLD) is selected, the washing is left in
the last rinse water, it is not spun.
3 If you do not reduce the spin speed, the final spin for all washing
programs is automatically performed at 1000 revolutions per minute.
The speed for the intermediate spin is dependent on the program
selected and cannot be changed.
During the Washing Program
Program Progress Indicator
The program selector serves as a program progress indicator by rotating
in a clockwise direction to the end of the program.
3 In the case of the STAIN (position 1), MAIN WASH (position 2) and
QUICK WASH (position 3) programs, immediately after program start
the program selector moves to a position directly behind QUICK WASH
(position 3). The program selector then indicates the progress of the
program as usual.
Changing Settings
During the washing program you can:
– Change the spin speed
– Select o (RINSE HOLD)
– Change the temperature setting
Other settings cannot be altered.
Stopping the Program Early
0 1.Press the M (ON/OFF) button.
2. Turn the program selector clockwise to position 8 (PUMP OUT).
3. Press the M (ON/OFF) button again.
The water is pumped out.