Filter
Top Products
Drying
17
0 If required, select the button SPECIAL CARE
(LAGE TEMPERATUUR), AUDIBLE SIGNAL
(ZOEMER), QUICK DRY (KORT).
• SPECIAL CARE (LAGE TEMPERATUUR) button
This program operates with reduced heat. Press the SPECIAL CARE
(LAGE TEMPERATUUR) button for fabrics bearing the care symbol S.
Gentle drying is advisable for heat-sensitive fabrics (such as acrylic and
viscose). The SPECIAL CARE (LAGE TEMP.) button has no effect if the
QUICK DRY (KORT) button has already been pressed.
• AUDIBLE SIGNAL (ZOEMER) button
During the crease-protection phase (immediately after the drying
process), an acoustic signal is sounded at certain intervals (see "End of
drying process").
• QUICK DRY (KORT) button
The selected programme runs on a shortened programme to produce
the same degree of drying. The QUICK DRY (KORT) button cannot be
used with COTTONS DAMP (KATOEN STRIJKDROOG
c
), HAND IRON
(STRIJKDROOG
b
) and MACHINE IRON (MANGELDROOG) programmes
or with the DELICATES DAMP (MENGWEEFSELS STRIJKDROOG
c
) pro-
gramme. The QUICK DRY (KORT) button has no effect if the SPECIAL
CARE (LAGE TEMP.) button has already been pressed.
Delay start timer
Using the delay start timer you can delay the start of the drying pro-
gramme by 3, 6 or 9 hours.
0 Setting the programme.
0 Hold down the DELAY TIMER
(STARTTIJDKEUZE) button until the required
number of hours before the programme is to
start is shown in the display panel.
0 Press START/PAUSE (START/PAUZE ) button.
After the set number of hours has passed the
tumble dryer will automatically begin the
set drying programme. The number of hours
until the set drying programme is due to
begin is shown in the display panel.
You can adjust the pre-selected delay start at any time.