Filter
Top Products
User’s instructions
22
9. Operating problems
Many checks have been carried out during the manufacture of your
washing machine. However, if you face a problem with its operation,
please read the following sections before calling the After Sales servi-
ce.
Symptom Cause
The washing machine will
not start or will not fill:
• the washing machine is not correctly
connected, the electrical installation is
not working,
• the lid of your washing machine and
the drum flaps are not correctly
closed,
• you did not control the program start
correctly,
• there is a power failure,
• the water supply is closed off,
• the water tap is closed,
• the water inlet is blocked.
The washing machine fills
up but empties again im-
mediately:
• the drain siphon is attached too low
(see installation section).
The washing machine fills,
then the programme knob
advances quickly to the
end of the cycle and the
machine drains or the wash
does not take place:
• the drum doors are not closed cor-
rectly.
The washing machine will
not spin or will not empty:
• the drain pipe is blocked or kinked,
• the drain filter is blocked,
• the «Drain» program or the «Rinse
hold»
*
option is selected,
• the height of the drain siphon is
wrong.