Filter
Top Products
46
Installation
Unpacking
All transit bolts and packing must be removed before using the appli-
ance.
Using the supplied
spanner, unscrew
and remove the 2
rear bottom screws.
Slide out the 2
plastic pins. Lay the
machine on its
back, taking care
not to squash the hoses. This can be avoided by
placing one of the corner packing pieces
between the machine and the floor.
Remove the polystyrene block from the
bottom of the machine and release the two
plastic bags.
Carefully slide out the left-hand bag removing
it towards the right and then downwards.
Slide out the right-
hand bag removing
it towards the left
and then upwards.
The bottom cover
plate, which can
be found inside
the machine with
the instruction
book, will now need to be fitted. Hook the bottom of the plate «A»,
into position first. Then push the other end of the plate into position.
Important!
You can find more detailed instructions regarding the bottom cover assemblig
in its relative bag.
P1129
P0001
P1124
2
3
1
P1204
2
1
A
P1205
132986450 gb.qxd 24/03/2005 09:52 Pagina 46