• Machine heating phase. A dot to the right of the figures in the
display indicates that the machine is heating the water. During this
phase the user can therefore decide whether to use other electrical
appliances simultaneously.
• incorrect option selection. If an option which is not compatible with
the set wash programme is selected, the message Err is displayed.
E QUICK WASH button (KISA YIKAMA)
By pressing this button the washing time is reduced. For use when
washing lightly soiled laundry.
This option is not available with the wool programme (D).
F PREWASH button (ÖN YIKAMA)
The machine performs a prewash cycle at 40°C max. The prewash cycle
ends with a short spin in programmes for Whites and Coloured cottons
(Beyazlar/Renkliler) (A) and Synthetics (Sentetikler) (B), and with emp-
tying of the water only for Delicate programme (Hassas Çamaçirlar) (C).
This option is not available with the wool programme (D).
For use when washing heavily soiled laundry.
Important: the PREWASH (ÖN YIKAMA) and QUICK WASH (KISA YIKA-
MA) options cannot be selected together: one automatically disables
the other.
G EXTRA RINSE button (EK DURULAMA)
Can be used with all programmes except the wool programme. The
machine performs 4 rinses instead of 3.
This option is recommended for people who are allergic to detergents
and in areas where the water is very soft.
H Anticrease button (stop with water in drum)
(SUDA BEKLETME)
When this button is pressed, the last rinse water is not emptied out, to
prevent the fabrics from creasing. When the programme has finished,
the corresponding pilot lights (on the programme phase indicator) and
above the button flash to indicate that the water must be emptied out.
To empty out water:
• press the START/PAUSE (START ARA VERME) button: after emptying,
the machine performs the spin cycle required for the type of wash
selected;
55
Description of the appliance