Filter
Top Products
450452-4 www.amdry.com 19
Reversing T.E.F.C. Motor Mount Assembly
Illus. No. Part No. Qty. Description
1 100109 1 4L-630 V-Belt (motor to idler)
2 100701 1 3/16” x 3/16” x 1” Key
3 101130 1 5/8” x 2-1/2” Motor Pulley (60 Hz Only)
101139 1 5/8” x 2-3/4” Motor Pulley (50 Hz Only)
4 120200 1 3/8” x 90° Connector
5 181003* 1 1/2 hp 208/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor (56Z frame)
6 150501 4 5/16-18 x 3/4” Tap Bolt
7 153002 4 5/16” Lock Washer
8 153001 4 5/16” Flat Washer
9 181043* 1 3 hp 220/230/380/460v 3ø 50/60 Hz Totally Enclosed, Fan-Cooled Motor
with 3/4” Shaft (56Z frame)
10 120200 1 3/8” x 90° Connector
11 150501 4 5/16-18 x 3/4” Tap Bolt
12 153002 4 5/16” Lock Washer
13 153001 4 5/16” Flat Washer
14 154000 8 5/16” Tinnerman Nut
15 152004 7 5/16-18 Hex Nut
16 153002 7 5/16” Lock Washer
17 153001 7 5/16” Flat Washer
18 803566 1 Reversing Motor Mount ONLY (56Z frame)
883027* 1 60 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 22)
883026* 1 50 Hz Reversing Totally Enclosed, Fan-Cooled Motor Mount Assembly Complete
(includes illus. nos. 2 through 14 and 18 through 22)
19 117604 4 Neoprene Sponge Tape (sold by the foot)
20 802027 1 16” Riveted High Flow Impellor (60 Hz models)
802024 1 16” Riveted High Flow Impellor (50 Hz models)
21 153065 1 1-1/2” Outside Diameter x 1/2” Washer
22 152006 2 1/2-20 Left Hand Jam Nut
* Check part number on motor data label to verify correct motor.