ADC AD-310 Clothes Dryer User Manual


 
65
Telephone: (508) 678-9000 Fax: (508) 678-9447
Illus. No. Part No. Qty. Description
1 141241 1 5-Port Front Manifold
2 142548 1 1" x 90° Elbow
3 150309 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw
4 334085 1 Pipe Bracket
5 142724 1 1" x 2" Long Nipple
6 140017 1 1" 24 VAC Natural Gas Valve
140018 1 1" 24 VAC Gas Valve L.P. Conversion Kit
7 334085 1 Pipe Bracket
8 150309 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw
9* 140834 5 #5 Burner Orifice (natural gas)
140819 5 #30 Burner Orifice (L.P. [liquid propane])
10 142711 1 1" Close Nipple
11 150309 4 #10-16 x 1/2" Hex Head TEK Crimptite Screw
12 334086 1 Manifold Rest
13 150301 10 #8-18 x 7/16" Phillips Pan Head TEK Screw
14 150309 4 #10-16 x 1/2" Hex Head TEK Crimptite Screw
15 334083 1 Burner Tube Rest
16 150309 5 #10-16 x 1/2" Hex Head TEK Crimptite Screw
17 150309 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw
18 880943 1 Direct Spark Ignition (DSI) Ignitor/Flame Probe Assembly
(includes HV [high voltage] wire and connector)
305410 1 Ignitor Gap Feeler Gauge ... Not Illustrated
881934 1 High Voltage (HV) Wire with Instrallation Instructions Kit
19 150309 4 #10-16 x 1/2" Hex Head TEK Crimptite Screw
20 334226 1 Burner Baffle
21 150309 2 #10-16 x 1/2" Hex Head TEK Crimptite Screw
22 150001 2 #6-32 x 1/2" Phillips Round Head Machine Screw
23 130201 1 330° Manual Hi-Limit Thermostat
(for models mfd. as of May 26, 1998)
130401 1 330° Automatic Hi-Limit Thermostat
(for models mfd. prior to May 26, 1998)
24 826021 1 Hi-Limit Mounting Bracket
25 151000 2 #6-32 Pal Nut
26 331290 1 Sight Hole Disc
27 150309 1 #10-16 x 1/2" Hex Head TEK Crimptite Screw
28 332597 1 Burner Box Cover Plate
29 141123 5 Burner Tube
30 -------- 1 Sail Switch
(refer to Sail Switch Assembly on page 68)
31 881515 1 Front Burner Box ONLY
881517** 1 Natural Gas Front Burner Box Assembly Complete Less Orifices
(includes illus. nos. 1 through 8 and 10 through 31)
881518** 1 L.P. Gas Front Burner Box Assembly Complete Less Orifices
(includes illus. nos. 1 through 8 and 10 through 31)
881011* 1 ADG-310 DSI L.P. Conversion Kit (includes orifices)
* Consult factory for elevations over 2,000 feet.
** Orifices are not included and must be ordered separately.
Front Gas Burner Assembly