Filter
Top Products
450126-8 www.amdry.com 19
Blower Motor, Fan, and Shaft Assembly
For 60 Hz Steam Models and 50 Hz Gas Models ONLY
Illus. No. Part No. Qty. Description
1* 100118 2 5L-310 V-Belt
2 101134 1 2B x 4.6 Motor Pulley
101138 1 SDS x 1-1/8” Bushing
3 100704 1 1/4” x 1/4” x 1-3/4” Key
4 100045 1 5 hp 230 / 460 / 3ø / 50 / 60 Hz Motor
5 150617 4 3/8-16 x 1” Hex Head Machine Bolt
6 153004 4 3/8” Flat Washer
7 332198 1 Motor Adjustment Bracket
8 153004 4 3/8” Flat Washer
9 153005 4 3/8” Lock Washer
10 152005 4 3/8-16 Hex Nut
11 101143 1 2B x 3.8 Pulley
101152 1 SH x 1-3/8” Bushing
12 100706 1 5/16” x 5/16” x 1-3/8” Key
13 332195 1 Impellor (Fan / Blower) Shaft
14 100802 2 1-3/8” Retaining Ring
15 880879 2 1-3/8” Pillow Block Bearing with Setscrews and Grease Fitting
16 116014 1 3” x 3” Impellor (Fan / Blower) Shaft Gasket
17 150606 4 1/2-13 x 2” Hex Head Machine Bolt
18 153016 4 1/2” Flat Washer
19 820990 1 Blower Motor Mount ONLY
(for models mfd. as of September 11, 1992)
820960 1 Blower Motor Mount ONLY
(for models mfd. prior to September 11, 1992)
820974 1 ADS-170 60 Hz / ADG-170 50 Hz Blower Motor Mount Assembly Complete
(for models mfd. as of September 11, 1992)
(includes illus. nos. 1 through 22 and 26 through 34)
820981 1 ADS-170 60 Hz / ADG-170 50 Hz Blower Motor Mount Assembly Complete
(for models mfd. as of September 11, 1992)
(includes illus. nos. 1 through 22 and 26 through 34)
20 153016 4 1/2” Flat Washer
21 153026 4 1/2” Lock Washer
22 152011 4 1/2-13 Hex Nut
23 152005 8 3/8-16 Hex Nut
24 153005 8 3/8” Lock Washer
25 153004 8 3/8” Flat Washer
26 150609 2 1/2-13 x 4-1/2” Hex Head Machine Bolt
27 152011 2 1/2-13 Hex Nut
28 117600 6 Noise Suppressor Tape (sold by the foot)
29 100609 1 20” Aluminum Impellor (Fan / Blower)
30 100708 1 3/16” x 3/16” x 2-1/16” Key
31 153065 1 Fan / lmpellor Washer
32 152006 2 1/2-20 Left-Hand Jam Nut
33 820965 1 Belt Guard ONLY
34 150522 4 1/4-20 x 1” Hex Washer TEK Screw
* Replace in matched sets (both belts).